KIT A1: THIS IS OUR DELUXE TYPE 3 FRAME SET-UP, 
EVERYTHING YOU NEED TO START YOUR TRIKE.

The frames neck is made out of 2” by 2” by ¼” heavy wall square tubing, lined up with a laser, and then welded at a 37 degree rake to the suspension, has 1” stem bearings, dust covers, and a neck stop that is included.

The transmission mount and rear body mount are made of 3” by 3” by ¼” angle, 1-1/2” by 11 gauge square tubing, with 5/16” plate to bolt the 10mm bolts to the side of the transmission. Two 10mm bolts & spacers, with two 2” by ¼” angle clips are used to mount it to the shock towers. Two extra 1-1/2” square tubes are welded to the 5/16” mounting plates to secure the belly 14 gallon gas tank and the chrome motor cage. The transmission front is mounted to the suspension with a rigid fabricated front transmission mount along with 12 mm bolts.

AI-KIT:

The A1-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable. Chevy 5 whole disc brakes & braded brake line kit. The chrome Springer front end is a 6” over DNA, with 4” risers, fender tabs, and chopper head light & bracket, steel wide glide front fender. The front wheel is chrome DNA 60 spoke 21” x 3-1/2” with an Avon 90/90-21” Road Rider front tire. The chrome handle bars are 1” with hand grips, Harley chrome switch housings & chrome switches, a custom 120” throttle cable, and a Trail Tech Vapor multi-function speedometer & mounting bracket for the CV speed sensor. The chrome Chevy 5 whole rear wheels are 15” x 8” with new 275-60-15 tires. This kit also includes a chrome DNA front brake caliper, super spoke front brake rotor & mounting bolts, a handle bar mounted front brake master cylinder, braded brake line & fittings.

 

The cost of the A1-KIT is only $9068.00 plus tax for Missouri residence or plus P & H & shipping to your location.

 

 

A2-KIT:

The A2-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable.  Chevy 5 whole disc brakes & braded brake line kit.  The chrome Springer front end is a 6” over DNA, with 4” risers, fender tabs, and chopper head light & bracket, steel wide glide front fender.  The front wheel is chrome DNA 60 spoke 21” x 3-1/2” with an Avon 90/90-21” Road Rider front tire.  The chrome handle bars are 1” with hand grips, Harley chrome switch housings & chrome switches, a custom 120” throttle cable, and a Trail Tech Vapor multi-function speedometer & mounting bracket for the CV speed sensor.  The chrome Chevy 5 whole rear wheels are 15” x 8” with new 275-60-15 tires. 

The cost of the A2-KIT is only $8404.00 plus tax for Missouri residence or plus P & H & shipping to your location.

 

 

A3-KIT

 

The A3-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

    

Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable.  Chevy 5 whole disc brakes & braded brake line kit.  The chrome Springer front end is a 6” over DNA, with 4” risers, fender tabs, and chopper head light & bracket, steel wide glide front fender.  The front wheel is chrome DNA 60 spoke 21” x 3-1/2” with an Avon 90/90-21” Road Rider front tire.  The chrome handle bars are 1” with hand grips, Harley chrome switch housings & chrome switches, a custom 120” throttle cable, and a Trail Tech Vapor multi-function speedometer & mounting bracket for the CV speed sensor.

The cost of the A3-KIT is only $7809.00 plus tax for Missouri residence or plus P & H & shipping to your location. 

 

 

A4-KIT

 

The A4-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable.  Chevy 5 whole disc brakes & braded brake line kit.  The chrome Springer front end is a 6” over DNA, with 4” risers, fender tabs, and chopper head light & bracket, steel wide glide front fender.  The front wheel is chrome DNA 60 spoke 21” x 3-1/2” with an Avon 90/90-21” Road Rider front tire. 

 

The cost of the A4-KIT is only $7153.00 plus tax for Missouri residence or plus P & H & shipping to your location. 

 

 

A5-KIT

The A5-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable.  Chevy 5 whole disc brakes & braded brake line kit.  The chrome Springer front end is a 6” over DNA, with 4” risers, fender tabs, and chopper head light & bracket, steel wide glide front fender.

The cost of the A5-KIT is only $6448.00 plus tax for Missouri residence or plus P & H & shipping to your location. 

 

 

A6-KIT

 

The A6-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

     Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable.  Chevy 5 whole disc brakes & braded brake line kit. 

 

The cost of the A6-KIT is only $5661.00 plus tax for Missouri residence or plus P & H & shipping to your location. 

 

 

A7-KIT

 

The A7-KIT comes with my “Full Automatic Transmission Kit” which includes, a rebuild & road tested VW 003 transmission, rebuilt torque converter, flex plate & 3 mounting bolts, gland nut & washer, type 3 suspension that is sandblasted & finished painted, a set of RT. & LF. new CV joints & axels, a set of new coil over shocks, a set of new rear wheel bearings & spacers, a VW shifter, and a used starter.

     Also it comes with my neck, bearings, & dust covers, welded to the type 3 suspension, auto trans mount & rear body mount, adjustable “T-Bar”, brake & clutch pedals welded together, brake & clutch axel & yoke, brake master cylinder & linkage, foot pegs, chrome motor cage & body support brackets, battery box, 14 gallon belly gas tank, sending unit & mounting brackets, auto shifter brackets & shift cable.   

The cost of the A7-KIT is only $5127.00 plus tax for Missouri residence or plus P & H & shipping to your location. 

 

 

Steering Neck For A Type 3 Suspension

 

This neck is made for a Possum Pride Body ready to weld to your type 3 VW IRS suspension. The neck frame is made out of 2” by 2” by ¼” tubing. The part that is welded to the type 3 IRS suspension is made out of 2” by 4” by ¼” tubing.  The steering neck is welded on a 37-degree rake and comes with 1” bearings & dust cap. This part is primer painted.

The cost of this neck is $518.00 plus tax for Missouri residence. P & H & shipping cost to most places is $50.00. 

 

New Rigid Front Transmission Mount to Suspension.

 

The new transmission mount replacement is made of ¼” material and comes with the metric mounting bolts & nuts for the suspension.  The cost of this item $75.00 plus tax in Ava.  P & H & Shipping to most places is $18.00.

 

The photo above is the suspension side.  To the left is the original front transmission mount.

The photo above is the automatic transmission side.  To the left is the original front transmission mount.